I use social media but I am not sure of the best way to incorporate it into teaching. Do the rules for student confidentiality vary from school to school, and is it best to create a page focused entirely for teaching and teaching resources only?
—H., North Carolina

Only use social media with your students if you have a plan to use it educationally. Websites are great places to host discussions, share research, upload presentations, post deadlines, and store worksheets or homework.

I categorically oppose using private or personal email addresses, Twitter feeds, websites, or Facebook pages to communicate with students or families. Set up specific accounts strictly for professional use and ensure your administration knows. As much as possible, enable password access to your social media and limit who has access. Inform administration and parents of what and how you are using social media. However, even allowing parents access to your site may be problematic.

Confidentiality policies may vary slightly between school districts but, in general, we all need to follow federal and state statues on privacy. In short, people outside your classroom should not be able to identify your students in pictures or words and should not have access to communicate with individual students. Most districts will have media release forms for families to grant or deny the school permission to post photos, work or names of their children. Your administrators will be well versed in the school district’s policies regarding what and how you can use it with your students.

Keep your students safe. Keep yourself safe.

Hope this helps!

Image by Thomas Ulrich from Pixabay

Our school requires all students to take chemistry. We teach all levels, ranging from Collaborative/Inclusive Chemistry to Honors and AP Chemistry. All of our classes have students who speak different languages, as well as students with a range of social and physical disabilities, home lives, and socioeconomic statuses. One way we ensure equity in our classroom is by implementing multimodal, phenomenon-based assessments.

Multimodal means students can communicate their understanding using discussion, writing, and/or visual (drawings, symbols, tables, graphs, charts, gestures) representations. Phenomenon-based assessments give students real-world connections to the science ideas and require them to use the science and engineering practices and crosscutting concepts to explain the phenomenon or propose a solution to a problem. Using this method, we can get a real measure of what students actually know.

How Does This Look in the Classroom?

In our Nuclear Chemistry Unit, we use the phenomenon of the Chernobyl disaster: specifically, why food is still contaminated more than 30 years later. One of the ways we assess student understanding early in the unit is with a Stop Motion Video project.

We divide students into groups of four and assign each group one element from the periodic table. The groups must illustrate nuclear processes—including fission, fusion, and alpha and gamma radiation—using stop motion video. Before they begin, we give them a quick introduction to the open source app Stop Motion Studio. The students have fun making a short stop motion video to learn the app’s mechanics.

Then we allow them one class period (90 minutes in our school) to plan and create a storyboard for their video. We lead a whole-class discussion about the criteria for each video, then together create a video checklist. The groups have to decide who will be responsible for each of the four nuclear processes assigned.

We give students examples of materials they can use to create models. They may use physical representations such as beads, beans, or marshmallows; we even had some students punch holes in paper and use the paper dots. Students can also use dry erase markers to write on their desks or markers and poster paper.

Students have complete control over the method they use. They use methods that are built into our classroom culture in which they get peer feedback from group members to ensure they are working toward the task criteria.

Students use the next class period to create their videos. They really have a ton of fun putting their own creative spin on communicating what they’ve learned, in a unique manner that other students can then use to inform people about nuclear radiation. The products they design very clearly tell us to what degree the students understand and are able to model nuclear processes, as well as the parts of atoms, all the while employing familiar technology (smart device).

Here is one student’s example: https://drive.google.com/file/d/16Gohu8tIF_87stFikNy1xXLiSfJe3Hfo/view?usp=sharing.

What we love most about this assessment is the way it gives our students choices in the way they demonstrate what they have learned. The task is scaffolded to allow students to be supported through each phase, whether that is through think-alouds as the teacher is discussing the task itself, or by working with peers in a meaningful way to brainstorm the best method for communicating the science ideas they have learned.

One of the really cool things we’ve experienced since teaching students to use this app is students informing us that they used this same technology for a project in a different class. It’s rewarding to discover that not only are we teaching science and checking for our students’ understanding, but we are also exposing our students to strategies that are meaningful to what they want to accomplish outside of the classroom.

Laura Littrell teaches Chemistry at Boone County High School in Florence, KY.  She has taught Science for 11 years.  She has earned a Bachelor’s Degree in Chemistry at Butler University and a Masters Degree in Science Education at the University of Tennessee.  She serves as Science teacher Ambassador for Boone County Schools working to implement NGSS across the district as well as improve Assessments to make them 3 dimensional. Littrell loves phenomenon driven instruction and continues to change her course so that students can connect Chemistry concepts to everyday phenomena.

Kevin Williams is a high school chemistry and engineering teacher in Florence, Kentucky. This is his 6th year teaching at Boone County High School. Williams holds a bachelor’s degree in biology and a master’s degree in education both from Northern Kentucky University. He is passionate about engaging students in three dimensional science lessons and making learning exciting.

Note: This article is featured in the January 2020 issue of Next Gen Navigator, a monthly e-newsletter from NSTA delivering information, insights, resources, and professional learning opportunities for science educators by science educators on the Next Generation Science Standards and three-dimensional instruction.  Click here to sign up to receive the Navigator every month.

The mission of NSTA is to promote excellence and innovation in science teaching and learning for all.

Creating an Environment for All Students to Show Their Understanding

Much discussion has focused on how the NGSS (and other state standards based on the Framework and NGSS) make science accessible to all students. I believe all students can be successful when lessons are designed to use the three dimensions to make sense of phenomena.

What Does an NGSS Classroom Look Like?

The NGSS classroom looks very different from the traditional classroom. Unlike past standards, the NGSS require students to develop ownership of the big ideas in science, not just memorize broad definitions with examples. Students are driving their own learning through the unit and creating artifacts demonstrating their in-depth understanding of the science ideas along the way. All of my units begin in the same way to ensure all of my students have equal-access sensemaking. I offer this glimpse into the thinking and intention of how I start each unit to ensure from the beginning that I am focused on how I can support and engage all students in my classroom:

• I create a storyboard—also referred to as a storyline—that establishes a learning progression for the unit. I consider the questions my unit-level phenomenon will elicit and design lessons that create opportunities for students to answer them.
• The unit begins with students experiencing the unit-level phenomenon. This might happen through pictures, data charts, and/or short videos. We create a class record of our observations.
• The students write their initial questions about the phenomenon that are formulated through a technique called Questioning Formulating Techniques (QFTs).

The questions students ask (and new questions that arise) drive the unit. We decide which question (or questions) we will try to answer, which leads us to the next lesson, and then the next question.

Intentionally Supporting Students

I find that all my students learn from one another through engaging with the science and engineering practices and having opportunities to demonstrate their understanding of the science ideas. As I analyze my class data, individual student demographics aren’t apparent: The data shows students who exceeded the “basic level” of the performance expectations, those who mastered them, and those (less than 10%) who need additional opportunities to engage in the practices to make sense of the targeted science ideas. I find student success is directly linked to the numerous opportunities they are given, opportunities that meet them at their current level of understanding and gradually bring them to an increase in rigor. This also allows students who have a greater understanding of the science ideas to begin higher and create related extensions. The students know where to begin by evaluating the self-guided proficiency chart.

Remediation is based on what my formative assessments tell me the students are struggling with most. In these mini-sessions, I ask specific questions about their artifacts or work on short, guided-learning tasks with them. After the mini-sessions, students tend to clarify any misunderstanding and indicate areas that need to be clarified. I will hold these additional sessions right before the summative assessment to answer any last-minute questions. 

Teaching NGSS holds teachers more accountable for developing coherent storylines built around relevant phenomena and integrating the science and engineering practices and crosscutting concepts into each lesson or activity to support students while they are building their science knowledge. Through this process, I have been able to develop opportunities to individualize the learning experience and ascertain the level of mastery for each of my students. Since I started this, I have had tremendous feedback from several students in all demographics: 

• “Now I really have to think and process the information.” 
• “I do not have to just tell you definitions; I have to connect them to the given task.”
• “I like doing science like this because it really helps me understand what they are asking me.” 
• “I feel like I can discuss the information in class, and [if I don’t understand something,] I feel like I [can] ask questions about it and not be [labeled as] ‘different’ because a lot of students ask questions in the discussion.”

As teachers, we want all students to be successful, so it is up to us to create a classroom environment that allows this to happen. It is up to us to design units/lessons that make it clear what students are trying to figure out, that are relevant and engaging to students, and that are scaffolded in a manner that helps every kid feel supported. When we have students who are not successful, we have to look inward and ask what we can do differently to enable their success.

Students’ resources

Hallie Booth has spent 25 years in education, serving as an instructional specialist, assistant principal, principal, and the Kentucky Department of Education Regional Science Lead. She currently teaches eighth-grade science at Ballyshannon Middle School in Boone County, Kentucky. Booth holds a Bachelor of Arts (BA) degree in Criminal Justice Law Enforcement, a BA in Elementary Education, a masters in special education, an endorsement in K–9 science education, and a Rank 1 in leadership. She has served as a Common Core fellow, an Education Nation panelist, a Literacy Design Collaborative trainer, an education consultant for the Southern Regional Education Board, and a Thurgood Marshall Foundation trainer. Contact her via Twitter: @alwaysreach1.

Note: This article is featured in the January 2020 issue of Next Gen Navigator, a monthly e-newsletter from NSTA delivering information, insights, resources, and professional learning opportunities for science educators by science educators on the Next Generation Science Standards and three-dimensional instruction.  Click here to sign up to receive the Navigator every month.

The mission of NSTA is to promote excellence and innovation in science teaching and learning for all.

In one of my favorite lessons, I take my kindergarten students outside to explore the schoolyard. Though I take my students outdoors throughout the year, I do this lesson at the beginning of the year because it’s an opportunity to teach students to make observations and ask questions. I love seeing my students’ excitement grow as they move around the schoolyard, noticing and wondering about everything! I also get a chance to learn about my students and the wealth of ideas and experiences with nature they bring with them to school.

In this lesson, students begin to develop elements of the Science and Engineering practice of Analyzing and Interpreting Data: Record information (observations, thoughts, and ideas) and Use and share pictures, drawings, and/or writings of observations. We talk about our five senses and how to use them to make observations. I also want to develop the Asking Questions element: Ask questions based on observations to find more information about the natural and/or designed worlds.

Students walk around the school grounds looking for something in nature they would like to observe closely. I like to have everyone walk in silence or very quietly so they can hear the sounds in nature. They might see a bird or butterfly nearby, or find one of the courtyard box turtles eating some tomatoes from our class vegetable garden spot. Many different flowers and plants surround the area, too. When students find that one thing they want to study further, they draw what they see and record in words, pictures, and symbols what they’ve observed with their other senses. They can also measure the object using grade-appropriate tools. 

I ask the students to think about questions they could ask about the object. Then students share with a partner or small group the observations they made and the things they are wondering about the object. Their partner or group members can then ask additional questions and share their own observations. 

Every student has access to this type of learning to help them succeed, and each is bringing different experiences to share with others while experiencing all kinds of new things in nature.

Organizations around the country are helping students and teachers experience the challenges and rewards of building a full-size airplane, allowing students to apply science, technology, engineering, and math (STEM) as well. One organization, Texas nonprofit Tango Flight, builds airplanes with students at high schools nationwide. President and co-founder Dan Weyant, Career and Technical Education (CTE) teacher at East View High School in Georgetown, Texas, says the worldwide “demand for pilots, aerospace engineers, and mechanics” inspired him in 2016 to ask his principal and district superintendent if he could establish a year-long class to build a Van’s Aircraft RV-12 two-seat, single-engine, low-wing airplane with students at East View and Georgetown High Schools. Weyant chose the RV-12, which is built from a kit, making it relatively easy to construct compared to other aircraft.

Weyant successfully addressed administrators’ concerns, such as liability. “To mitigate liability, Tango Flight owns the planes and manages assets,” he explains. When a school or district completes a plane, Tango Flight sells it, and the money goes back to the local program to fund the next plane build.

It costs about $100,000 to start the program, he adds, but “there are many ways to fundraise this; the district doesn’t have to pay it all upfront.” Aircraft manufacturer Airbus Americas has funded builds, as well as local aviation museums, businesses, and the city government. Local businesses and nearby colleges and universities also provide mentors for the students.

The first Tango Flight class was a partnership among the two schools, Tango Flight, local businesses, and the STEM program Project Lead the Way (PLTW), on which the curriculum was based. Since then, Weyant, university partners, and Airbus Americas have created a college-level Tango Flight curriculum now used by participating high schools. Tango Flight operates in eight schools in Georgetown, Texas; Wichita, Kansas; Mobile, Alabama; Naples, Florida; Manchester, New Hampshire; Atlanta, Georgia; and Yuba City, California.

“We provide curriculum, training [for teachers and mentors], technical support, and instruments,” Weyant relates. Some Tango Flight schools have students do internships with local businesses, he notes.

Mike Tinich was a PLTW aerospace engineering teacher at Maize South High School in Wichita, Kansas, when contacts at Wichita State University (WSU) recommended him to funder Airbus Americas to do a Tango Flight build. “We built our first plane while [the Georgetown, Texas, group] built their second one…We had a lot to learn, but we had the benefit of their knowledge from their first build,” he recalls.

“We had Airbus engineers work with us as mentors,” and WSU Tech, the local technical college, provided “an experienced airframe [plane structure] instructor to help teach procedures and inspect the finished product,” Tinich reports.

“We were still teaching PLTW during the build, but [Tango Flight] was [the] lab activity. Trying to incorporate both was a challenge,” he admits. “Sometimes the plane took precedence because we had to make sure the plane was safe to fly. ”

Having enough space to build a plane was a dilemma. “The logistics of doing it in a normal classroom were crazy,” Tinich contends. Besides needing room to work, they had “to organize thousands of parts.” Fortunately, “in January 2017, [our school] opened a Career and Technical Center, and the new room had a hangar door on it and more space,” he adds.

“We made a lot of mistakes during the first year, even working with engineers,” Tinich recalls. “But the kids could see adults fail, then move on. [They saw that] failure is an option!”

Students most enjoyed “the opportunity to work with an engineer…It opened their eyes up to opportunities in the aerospace industry,” says Tinich. “Building a plane taught them so much more than just the knowledge of why we have to measure twice and cut once. There was a lot of problem-solving [experience] that was invaluable.”

Aerospace Enrichment

In the Wings Aerospace Pathways (WAP) program held by Wings Over the Rockies Air & Space Museum in Denver, Colorado, students “build and fly drones; earn [Commercial Drone Pilot Certification];…take concurrent enrollment courses toward an A&P [Airframe and Powerplant (engine system)] certification;…and build the RV‑12,” says April Lanotte, the museum’s director of education. Designed for students in grades 6–12, WAP is an enrichment program for homeschooled students, those in online schools, and students in traditional schools that allow them to be released one day each week to participate.

Middle school students learn skills to prepare them to build a plane as high school students: using tools, soldering, and learning about basic electronics, ham radios, and aviation and space history, for example. “It helps middle school students decide what’s next for them,” whether they’d like to be pilots, mechanics, or work in another position in the industry, Lanotte maintains.

When choosing students for the build, CTE Coordinator/Instructor David Yuskewich says, “I look for students who are on-task, good at following directions, self-directed, focused, know what tools to use, and are able to lead other students.” In WAP’s tools and skills classes, “parts of the plane that are not done right have to be scrapped, which costs money and time. I don’t accept any less than perfect on the plane,” he asserts.

“During the build, the students do 80% of the work. A group of adults come in on Saturdays and do the rest of the work to keep things on track,” Yuskewich explains.

Students “wear safety glasses, ear protection, aprons, and gloves, so no one gets hurt,” he reports.

“We have a low mentor-to-student ratio so no student works alone,” Lanotte adds. “Students must be technically and mentally able to do the work for safety reasons. They take it seriously.”

Volunteers who have worked in the industry serve as mentors, including inspectors who can certify the work. “I am an EAA Technical Advisor and inspect the planes. We also have a volunteer who is a technical advisor and serves as ‘outside eyes’ when inspecting the planes,” says Yuskevich.

“We [also] have a team of students who are working on restorations of old planes,” reports Lanotte. “These planes won’t be flown again, but students are copying and 3-D printing parts that aren’t available anymore.”

Though WAP’s annual tuition is $1,000, “we do have scholarships, so no one is turned away,” assures Lanotte. “We work with a local school district with a high [number of low-income students]; they receive 100% funding.” Many students, she adds, “earn elective credits” by taking the WAP classes.

This article originally appeared in the February 2020 issue of NSTA Reports, the member newspaper of the National Science Teaching Association. Each month, NSTA members receive NSTA Reports, featuring news on science education, the association, and more. Not a member? Learn how NSTA can help you become the best science teacher you can be.

The mission of NSTA is to promote excellence and innovation in science teaching and learning for all.